Wesley BC-6200-8SA - Manual (Page 17)

Curtis 1268 Manual, Rev. D
11
ITS Throttle
The ITS throttle is a 2-wire electronic throttle that connects between the Pot
High and Pot Wiper pins (Pins 13 and 15), as shown in Figure 6. The Hall
sensor circuit within the throttle creates an output current between 0.7mA and
1.6mA from min to max throttle. The two wires are interchangeable.
2 — INSTALLATION & WIRING: Throttle
Note: ITS throttles can only be used with 1268 models that are specifi-
cally designed for them.
Fig. 6 Wiring for ITS
throttle. Pot High input (Pin 13)
Pot Low input (Pin 15)