3. bridge mode disabled – Campbell Scientific NL240 Wireless Network Link Interface User Manual
Page 16

NL240 Wireless Network Link Interface
(R2-232 and CS I/O) is only associated with one service (PakBus router, serial
server, Modbus/TCP Gateway, etc.) at a time. For example, you can have an
RS-232 serial server and a CS I/O serial server, an RS-232 serial server and a
CS I/O PakBus router, an RS-232 PakBus router and a CS I/O serial server, or
an RS-232 PakBus router and a CS I/O PakBus router. In addition, the NL240
can act as TLS proxy server. The TLS proxy server is independent of other
modes.
FIGURE 4-3. Bridge Mode disabled
Some reasons you might want to use each of these modes are described below.
Refer to Section 7, Configuring the NL240, and Section 8, Operation, for
information on setting up your NL240 for each mode.
6