beautypg.com

B.2 configuration testing – Campbell Scientific EnviroSCAN Sentek Water Content Profile Probe User Manual

Page 29

background image

Appendix B. Normalization and Function Test

B.2 Configuration Testing

FIGURE B-6. IPConfig Configuration Test Window

Test the configuration by going to the “Configuration Test” tab as shown in
Figure B-6. Again, with the probe in the access tube, hold the probe in the air,
then press “Query All Sensors.” Press “Stop Sensor Querying” when values
appear in the window. Raw counts should be close to the values shown in the
example above.

B-5