1 cnr4 specifications, 2 pyranometer specifications, Cnr4 specifications – Campbell Scientific CNR4 Net Radiometer User Manual
Page 18: Pyranometer specifications

CNR4 Net Radiometer
6.1 CNR4 Specifications
Sensor sensitivities:
Four probes with unique sensitivity
values. Please refer to the calibration
sheets or label on the bottom of the
sensor for the sensitivity values.
Operating temperature:
–40 to +80°C (–40 to 176°F)
Operating humidity:
0 to 100% RH
Bubble level sensitivity:
< 0.5°
Sensor type:
Thermopile
Receiver paint:
Carbon Black
Desiccant:
Silica gel (replaceable)
Housing material:
Anodized aluminum body
Shock/vibration:
IEC 721-3-2-2m2
CE:
Complies with EC guideline
89/336/EEC 73/23/EEC
Environmental protection:
IP 67
Requirements for data acquisition
Radiation components:
4 differential or 4 single-ended analog
channels
Thermistor:
1 voltage excitation and 1 single-
ended analog channel
Pt-100 temperature:
1 current excitation and 1 differential
analog channel.
Cable length:
User defined
Weight
Sensor:
0.85 kg (1.89 lb) without cables
Heater/ventilator, CNF4
(optional):
0.50 kg (1.11 lb) without cables
Mounting rod:
34.7 cm (13.67 in) length
1.6 cm (0.63 in) diameter
6.2 Pyranometer Specifications
* indicates ISO specifications.
Spectral range:
305 to 2800 nm (50% points)
Sensitivity:
10 to 20 µV/W/m
2
Response time*:
< 18 seconds (95% response)
Non-linearity*:
< 1% (0 to 1000 W m
-2
irradiance)
Non-stability*:
< 1%
Temperature dependence of
sensitivity*:
< 4% (–10° to +40°C)
Tilt response*:
< 1% at any angle with 1000 W/m
2
10