Campbell Scientific CM6/CM10 Tripod Weather Station Installation User Manual
Campbell Scientific Measuring instruments
Table of contents
Document Outline
- Revision and Copyright Information
- Warranty and Assistance
- Table of Contents
- Section 1. Preparation and Siting
- Section 2. CM6/CM10 Tripod Installation
- Section 3. Instrumentation Installation
- 3.1 Enclosure, Datalogger, Power Supply
- 3.2 Sensor Connection
- 3.3 Communication and Data Storage Peripherals
- 3.4 Sealing and Desiccating the Enclosure
- Section 4. Sensor Installation
- 4.1 034B Met One Windset
- 4.2 05103, 05103-45, 05106, and 05305 RM Young Wind Monitors
- 4.3 03002 RM Young Wind Sentry Wind Set
- 4.4 Licor Silicon Radiation Sensors (LI200X, LI200S, LI190SB)
- 4.5 107/108 Temperature Probe
- 4.6 107/108 Soil Temperature Probe
- 4.7 HMP50 Vaisala Temperature and RH Probe
- 4.8 HMP45C/HMP35C Vaisala Temperature and RH Probe
- 4.9 CS100 or CS106 Barometric Pressure Sensor
- 4.10 Texas Electronics Tipping Bucket Rain Gages (TE525, TE525WS, TE525MM)
- 4.11 TB4, TB4MM or CS700 Rain Gage
- 4.12 SR50A Sonic Ranging Sensor
- 4.13 CS616 Water Content Reflectometer
- 4.14 237 Leaf Wetness Sensor
- 4.15 257 Soil Moisture Sensor
- 4.16 CS210 Enclosure Humidity Sensor
- 4.17 Wind Direction Sensor Orientation
- Section 5. Standard Software Installation
- Section 6. Maintenance and Troubleshooting
- Campbell Scientific Contact Information