Flytec Windwatch Pro - Manual (Page 26)

26 General information
Malfunction
In case of malfunction, remove the battery and re-insert it upside-down for a short moment (this
will not damage the WWP). Then insert the battery again in the correct position. This will reset
the entire memory of the instrument. Following this reset the instrument will perform a self-test.
If this procedure does not remedy the malfunction, please return the instrument with a precise
description of the problem to your FLYTEC dealer or direct to the manufacturer: FLYTEC AG,
Ebenaustrasse 18, CH-6048 Horw, Switzerland.
Care and Maintenance
The sensors in the WWP are very accurate and are calibrated at the factory. If after time any of
the functions need to be recalibrated, this can be done by the user; it is not necessary to send
the WWP in for service. Please contact Flytec for the procedure.
Warranty
The Windwatch PRO is warranted against material and manufacturing defects for two years.
Physical damage such as a broken housing or display window, as well as damage resulting
from abuse, battery leakage, improper care, exposure to excessive heat or opening the housing
are excluded from this warranty. In the event a defect is encountered during the two-year
warranty period, please contact your FLYTEC dealer for service instructions. Please carefully
read this operation manual before you contact FLYTEC for operation or service issues.
Water Damage
The Windwatch PRO is water resistant and can also withstand temporary immersion in water. If
the immersion is in salt water, precautions should be taken to prevent damage to the various
components: thoroughly rinse the sensor area with fresh water (no pressure) and then leave the
instrument to dry for 24 hours. Caution: Never try to accelerate the drying process with heat
devices and never by using a microwave stove. Microwave radiation will destroy the
instrument!
Disclaimer
FLYTEC (Flytec AG and Flytec USA) accept no liability for faults arising from any abuse or
unapproved use of the Windwatch PRO. Outdoor weather-dependent activities are generally
hazardous by nature. In rare cases, it may happen that the WWP provides incorrect data or
does not provide any data at all. FLYTEC is not responsible for any damages or injury due to
the incorrect functioning of the instrument. When engaging in weather-dependent activities, the
responsibility for safety lies solely with the participant.