Caution, Detaching and refitting the rails, Detaching the rails – Siemens HC724220 User Manual

Page 78: Lift up the front of the rail, And unhook it (figure a), Then pull the whole rail forward, And remove it (fig. b), Refitting the rails, And then hook it into the front socket (figure b), Detaching and attaching the oven door

The ceramic coating is regenerated. When the cooking
compartment has cooled down, remove the brown or white
residue with water and a soft sponge.

Light discolouration of the coating does not affect automatic
self-cleaning.

Caution!

■

Never use abrasive cleaning agents. You will scratch or
destroy the highly porous coating.

■

Never treat the ceramic coating with oven cleaner. If oven
cleaner accidentally gets onto it, remove it immediately with a

sponge and plenty of water.

Cleaning the cooking compartment floor, ceiling and side

walls
Use a dish cloth and hot soapy water or a vinegar solution.
If there are heavy deposits of dirt, use a stainless steel scouring

pad or oven cleaner. Only use when the cooking compartment
is cold. Never treat the self-cleaning surfaces with a scouring
pad or oven cleaner.

Detaching and refitting the rails

The rails can be removed for cleaning. The oven must have

cooled down.

Detaching the rails

Lift up the front of the rail

and unhook it (figure A).

Then pull the whole rail forward

and remove it (Fig. B).

Clean the rails with cleaning agent and a sponge. For stubborn

deposits of dirt, use a brush.

Refitting the rails

First insert the rail into the rear socket, press it to the back
slightly (figure A),

and then hook it into the front socket (figure B).

The rails fit both the left and right sides. The kinked section
must always be at the bottom.

Detaching and attaching the oven door

For cleaning purposes and to remove the door panels, you can
detach the oven door.
The oven door hinges each have a locking lever. When the
locking levers are closed (figure A), the oven door is secured in

place. It cannot be detached. When the locking levers are open
in order to detach the oven door (Fig. B), the hinges are locked.
They cannot snap shut.

ã=

Risk of injury!

Whenever the hinges are not locked, they snap shut with great
force. Ensure that the locking levers are always fully closed or,
when detaching the oven door, fully open.

Detaching the door

Open the oven door fully.

Fold up the two locking levers on the left and right (figure A).

Close the oven door as far as the limit stop. With both hands,

grip the door on the left and right-hand sides. Close the door
a little further and pull it out (figure B).

Attaching the door
Reattach the oven door in the reverse sequence to removal.

When attaching the oven door, ensure that both hinges are

inserted straight into the opening (figure A).

The notch on the hinge must engage on both sides (figure B).