Clary SP170-PDA - Manual (Page 32)

32
4.7 Event Log
Displays a history of the most recent 100 logged events. Once at this screen, press the ENTER/SHOW
TIME button. Then press the SELECT/MENU MODE button to go to the logs.
Use the Arrow Keys to scroll through the logs. Press and hold both the up and down arrow keys
simultaneously to clear all the event logs.
4.8 Options
Displays the current system option values and allows selected options to be modified.
Once at this screen, press the ENTER/SHOW TIME button. Then press the SELECT/MENU MODE
button to go through the options menu.
Not used. For future use.
This is the time in minutes that specifies the trip point that activates the Timer open collector signal on
the Signal port. Make sure you have changed the Flash Status Pin to “ON” to activate this feature. To
Change the value, press the arrow buttons. Once at the desired value, press the Enter/Show Time
button to save. The screen will now show the new value. Default is 120.
Status: EVENT LOG’s
LOG# 100 AC FAIL
mm/dd/yy hh/mm/ss
Status: OPTION’s
INTERFACE DELAY
current value = 2
FLASH TRIGGER (MINS)
current value = 120