Clary SP170-PDA - Manual (Page 27)

27
4.2 Normal Mode
The Normal mode’s main screen shows the Load and Battery percentage, AC input status and Inverter
status. The Normal mode display will look something like the following.
To see the time and date, press the ENTER/SHOW TIME button.
4.3 Battery System Status
Once at this screen, press the ENTER/SHOW TIME button. Then press the SELECT/MENU MODE
button to go through the Battery System Status menu.
Shows Battery status and Voltage
Shows condition of the Batteries.
Shows total time in hrs that UPS was running off of Battery Power.
To Clear usage, press and hold both the UP and Down Arrow buttons simultaneously until the time
clears.
LOAD 50% BATT 90%
AC LINE BAD, INV ON
STATUS: BATTERY Syst
St20: Battery Status
78V => BAT is FULL
LOAD 50% BATT 90%
mm/dd/yy hh:mm:ss
St22: Battery Usage
15 HOUR 10 MIN
St21: Bat Condition
Battery is GOOD!