Clary SP170-PDA - Manual (Page 28)

28
Shows number of times UPS went to Battery Power.
To clear events, press and hold both the UP and Down Arrow buttons simultaneously until the event
count clears.
Shows the nominal battery voltage and the battery Amp hours.
This screen allows the user to enter the Battery Capacity within the range of 10Ahr to 150Ahr.
To change Ahr rating, Press Enter. Press the Arrow buttons until the desired rating is displayed. Press
Enter to keep this change.
Shows estimated time remaining when UPS is running on Battery Power.
Shows Battery installation date. Can only be set to the current date. To reset, press and hold both the
UP and Down Arrow buttons simultaneously until it resets to the current date.
St27: Batt Inst Date
mm/dd/yyyy
St23: BACKUP Events
2 Events
St24: Battery Type
72 Volts 41 Ahr
St26: Estim Bat Time
10 minutes
St25: Battery Ahr
ALTER> Ahr = 41