Installing port powered insert reader, Installing magwedge – MagTek 99875125 User Manual

Page 92

Text mode
Original mode

MagTek Device Drivers for Windows

Installing Port powered Insert Reader:

Set “PPIR” under the “INSTALL” section. If you have selected to install the Port powered insert reader
driver then change the device settings under the “PPIR” section.

Change the value of PortName, UsePort, baud, datasize, stopbits, and parity.

Example:
[PPIR]
DEVICE= "Port-powered insert reader"
FriendlyName="Port-powered insert reader"
PortName=COM8:
UsePort=COM1:
baud=9600
datasize=7
stopbits=1
parity=EVEN

Installing MagWedge:

Set “MagWedge” to 1 under the “INSTALL” section. If you have selected to install the MagWedge driver
then change the device settings under the “MagWedge ” section.

Only PortName needs to be changed. The UsePort is already set to “KB:”.

Example:
[MagWedge]
DEVICE=MagWedge
FriendlyName=MagWedge
PortName=COM5:
UsePort=KB: