MagTek 99875125 User Manual

Page 84

Text mode
Original mode

MagTek Device Drivers for Windows

required, click the Specify settings manually radio button and modify the communication setup.
Click OK when done.

Modifying Device Settings in Windows NT/2000/XP
If you do not need to add or remove one of the device drivers but wish to modify one of the device’s
configuration parameters, you do not have to go back to the original installation disk. You can use the
Configurator program that you used during the installation of the drivers.

In order to run the program, navigate to the C:\Program Files\MagTek\MTDInstall folder. Double click on
ISConfigDlgMFC.exe as shown below.