MagTek 99875125 - Manual (Page 81)

Appendix A. Installation and Setup
When the computer restarts, you will be able to use any application that communicates with the MTD
drivers.
Modifying MTD Driver Installation
If you need to add a new device or modify one of the existing devices, you may run the setup program
from your original location or you can go to the control panel and use the Add/Remove Programs applet. If
you choose the latter approach, select MagTek Device Drivers (MTD) and click Add/Remove. The
InstallShield Wizard will be loaded so you can choose to Modify the existing installation.
At this point, you also have the options to Repair or Remove the MTD drivers. The Repair function will
ensure that all files on your disk are updated to the current configuration levels. The Remove selection will
allow you to remove all of the driver files from your PC.
73