MagTek 99875125 - Manual (Page 118)

MagTek Device Drivers for Windows
110
MINI MICR CHECK READER & MSR
File Name MINIMICR
Friendly Name(s) Mini MICR RS-232 & Mini MICR Wedge
Remarks These devices may or may not have an MSR installed. If not
installed, the driver may not properly indicate the
c_tracks
capability.
Commands Supported
/cancel cmd X /load_key n key /reset X
/display [x] /rawrecv X /set prop val X
/echo string X /rawsend x X /ver X
/event n data /rawxact x X /write data
/get prop X /read [[x] y] X
Properties Supported
Property Yes Default Property Yes Default Property Yes Default
account_no chk_mod10 X msg3
amount chk_number X msg4
applied_fmt X chk_routing X offline_enc
c_card_stat chk_status X oper_tout
c_cardwpin chk_transit X pin_blk_fmt
c_check X 1 cmd_pending pinfilldig
c_events dblpinentry port_name X
c_keypress dev_status X pwroffdelay
c_keystring dev_version X s_down_tout
c_magnetic X 1 enable_cmc7 X * track1ss X
c_mechanics 0 enc_key track2ss X
c_pin enc_key_sn track3ss X
c_smart 0 enc_mode trivpinchk
c_tracks X * entry_echo trk_enable X *
c_write 0 entry_len trk1data X
c_wr_secure entry_tout trk2data X
capitalize X 1 events_on trk3data X
card_stat invalcmdrsp X 0 visa_mac1
chk_account X key_parity visa_mac2
chk_amount X lasterr X visa_mac3
chk_bankid X max_pin_len wr_coer
chk_data X msg1 wr_secure
chk_format X ** msg2 xact_type
* = Depends on setting in the device.
** = Depends on setting in INF file (default = 6500). See "See Section 1, "MICR Format
Numbers" for more information.