Kenwood DNX9260BT - Manual (Page 86)

86 DNX series DNX9260BT/ DNX7260BT
Setup Menu
Speaker Setup Speaker Setup
You can select a speaker type and its size
to get the best sound effects.
1 Display the Speaker Select screen
Touch [ ] > > [ ] > > [Audio SETUP]
> > [Speaker Select]. (page 68)
2 Select a speaker you wish to adjust
When the speaker type and size are
set, the speaker crossover network and
equalizer curve are set automatically.
2 2 2
1 1 1
3 3 3
4 4 4
1 Center speaker (DNX9/ DDX8 series)
2 Front speaker
3 Rear speaker
4 Subwoofer
[Tweeter] You can set the tweeter when
you are selecting front speakers.
If you are using a tweeter together with
the front speakers, set the tweeter to
"ON". In the "ON" position, the Equalizer
is adjusted to its best position.
[X'over] Displays the Speaker Crossover
Setup screen.
You can adjust the crossover setup
that was set automatically when you
selected the speaker type.
3 Select a speaker type
You can select any of the following
speaker types.
"Center" None, 40x70 mm, 5 cm, 10 cm,
13 cm, 16 cm over
"Front" OEM, 10 cm, 13 cm, 16 cm, 17
cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10
"Rear" None, OEM, 10 cm, 13 cm, 16 cm,
17 cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10
"Subwoofer" None, 16 cm, 20 cm, 25
cm, 30 cm, 38 cm over
⁄
• Select "None" if you have no speakers.
• If you set the center speaker to "None" even in
a short time when you are setting the Surround
Control to "Bypass+Center", the Surround Control
is set to "Bypass" automatically. See Control> (page 67).
• If you set the center and rear speakers to "None"
when you are setting the Surround Control
to "Dolby PL II", the Surround Control is set to
"Bypass" automatically. See
(page 67).
B64-4676-00_01_E_English.indd 86 B64-4676-00_01_E_English.indd 86 10/02/05 15:27 10/02/05 15:27