Kenwood DNX9260BT - Manual (Page 82)

82 DNX series DNX9260BT/ DNX7260BT
Setup Menu
Bluetooth Hands-Free/Audio Bluetooth Hands-Free/Audio
Output Setup
Output Setup
Selects speakers to output the sound of
hands-free phoning (such as phone call
voice and ringing tone) and Bluetooth
audio.
1 Display the Bluetooth Setup screen
Touch [ ] > > [ ] > > [Bluetooth
SETUP]. (page 68)
[Bluetooth HF/Audio] Sets the output
speakers. ( "Front Only")
"Front Only": Outputs from the front
speakers.
"All": Outputs from all the speakers.
AV Input Setup AV Input Setup
You can set AV input parameters.
1 Display the AV-IN Setup screen
Touch [ ] > > [ ] > > [AV-IN SETUP].
(page 68)
2 Set each item
[AV-IN Interruption] Sets an image
display of the system that is connected
via the AV INPUT port. (
"OFF")
"OFF": When the image source is
switched, an image entered via the AV
INPUT port is displayed.
"ON": When an image signal is entered
via the AV INPUT port, this image is
displayed.
[iPod AV Interface Use] Sets the
terminal which iPod is connected.
(
"iPod")
[AV-IN1 Name], [AV-IN2 Name], [AV-IN3
Name] Sets a name to be displayed
when you select a system that is
connected via the AV INPUT port.
(
"VIDEO")
⁄
• [iPod AV Interface Use]
This item can be set when in STANDBY source
and also the iPod is disconnected.
• [AV-IN Name]
Two AV-IN names are displayed when "iPod" is
selected in [iPod AV Interface Use] and three are
displayed when not selected.
• [AV-IN3 Name]
DNX9/ DDX8 series only
B64-4676-00_01_E_English.indd 82 B64-4676-00_01_E_English.indd 82 10/02/05 15:27 10/02/05 15:27