Kenwood DNX9260BT - Manual (Page 73)

DDX series DDX8026BT English 73
Next page 3 Next page 3
4 Enter a security Code
Input four-digit number.
5 Register your security code
6 Reenter the security code
Reenter the same security code as
that you have entered in Step 4 for
confirmation.
⁄
• If you enter a different security code, the
screen returns to Step 4 (for the first code
entry).
7 Register the security code again
Now, your security code is registered.
If you have pressed the Reset button or if
you have disconnected the Receiver from
battery...
1 Enter the correct security code
You must enter the same security code
as that you have entered in Step 4.
2 Register your security code
Now, you can use your Receiver.
Monitor Angle Control Monitor Angle Control
You can adjust the position of the monitor.
1 Display the Angle Setup screen
Touch [ ] > > [ ] > > [System] > >
[Angle]. (page 68)
2 Set the Monitor Angle
1 1 1
1 Sets the Monitor angle.
[Off Position] Stores the current
monitor angle as the angle during
power off.
[Auto Open] When turned on, the front
panel is set to open automatically when
the ignition is turned off, so that it can
be detached for antitheft purpose.
(
"OFF")
B64-4676-00_01_E_English.indd 73 B64-4676-00_01_E_English.indd 73 10/02/05 15:27 10/02/05 15:27