Kenwood DNX9260BT User Manual

Page 74

DNX series DNX9260BT/ DNX7260BT

Setup Menu

EXT SW Setup

Sets up the exteral switch power mode.

Display the EXT SW screen

Touch [

]

[

]

[System]

[EXT SW]. (page 68)

Perform EXT SW Setup

[SW1 Name]/ [SW2 Name] Sets the

name of the external device. See To Use the Character Entry Screen>
(page 74) for information on how to enter
a name.

[Output Pattern] Sets the power signal

output mode.
(

EXT SW1: Pulse, EXT SW2: Level)

"Pulse": Generates a single power signal

pulse.

"Level": Continues output of high

power signal.

Sets to turn output on/off each time the
button on the EXT SW Control screen is
touched. See Supply Control> (page 48).

[Pulse Set] Sets the Pulse signal output

time.
Outputs 500ms when "1" is set.
Increases by 200ms with each step. Up
to 100 steps can be set.

How To Use the Character Entry Screen

1 Enters characters.
[

2], [3] Shifts the cursor.

[

5], [∞] Scrolls up or down the

character button display.

[Shift] Toggles between uppercase and

lowercase.

[qwe]/ [abc] Sets the key layout of the

character buttons.
abc : Alphabetical key layout.
qwe : Qwerty key layout.

[Clear] Clears the character.

[Space] Enters a space.

If you erase a character, locate the
cursor on it and touch this button.

⁄

• You can enter characters only after you have

applied the parking brake.

B64-4676-00_01_E_English.indd 74

10/02/05 15:27