Kenwood DNX9260BT User Manual

Page 64

DNX series DNX9260BT/ DNX7260BT

Set the Graphic Equalizer

DNX9/ DDX8 series

DNX7 series

1 Gain level can be adjusted by

touching the each frequency bar.
[

2], [3] Sets a frequency.

[

5], [∞] Sets a gain level.

[EQ Init] Returns to the previous level

which the gain level is adjusted.

[Flat] Tone curve becomes flat.

[Bass EXT] Bass Extend settings.

When turned on, the frequency lower
than 62.5 Hz is set to the same gain
level as 62.5Hz.

[SW Level] Adjusts the subwoofer

volume.
The setting is available when subwoofer
is set to any item other than "None". See
(page 86).

Zone Control

You can set the front and rear audio
source.

Display the Zone Control screen

Touch [

]

[

]

[Zone

Control]. (page 62)

Set the Zone Control

[Single Zone] Sets the unit to single

zone.

[Dual Zone] Sets the unit to dual zone.

[Front Source] Sets the front audio

source.

[Rear Source] Sets the rear audio

source.

⁄

• When the rear speaker sound is switched,

the audio source that is output at the AV
OUTPUT terminal is also switched to the
same source.

[Rear VOL.] Adjusts the volume of the

rear channel.

⁄

• There are following limitations when zone

function is set to "ON".

Audio Control

B64-4676-00_01_E_English.indd 64

10/02/05 15:27