Radio listening – Kenwood DNX9260BT User Manual
Page 37
DDX series DDX8026BT English
37
Next page
3
Radio Listening
Source Control Screen
Source Control Screen
Switches to the source control screen to
use various functions.
1
Display the Source Control Screen
See
2
Operation on the Source Control
screen
1
1
1
2
2
2
[FM] Switches to the FM1/2/3 band.
[AM] Switches to the AM band.
[TI] Turns the Traffic Information
function On or Off.
See
[
4], [¢] Tunes in a station.
Use the [SEEK] to change the frequency
switching.
2 Display the Tuner Preset List Screen.
See
1 Information display
FM
FM
Selects the Program Service
Name, Title & Artist name, Station
name, Radio Text plus, or Radio Text.
"FM"/ "AM" Band display
"Preset" Preset number
"MHz"/ "kHz" Frequency display
[
] When
appears, the text display
is scrolled by touching it.
Various control screens appear in the Tuner Source mode.
• Set the remote controller mode switch to "AUD" mode before starting operation, see mode switch> (page 96). Multi Function [1/3] Switches the multi function display. [ ] Closes the multi function bar. [P1] – [P6] When [P1] to [P6] buttons appear, you can recall the stations on [SEEK] Switches the Seek mode. The mode is switched in the following Display Setting "AUTO1" Tunes in a station with good reception "AUTO2" Tunes in stations in memory one after "MANU" Switches to the next frequency manually. [AME] Selects the Auto Memory mode. See [PTY] FM FM Searches station by program type. See [MONO] FM FM Select the Monaural reception. B64-4676-00_01_E_English.indd 37 B64-4676-00_01_E_English.indd 37 10/02/05 15:27 10/02/05 15:27
memory.
For memory of broadcasting stations,
see
order each time you touch the button.
automatically.
another.