Kenwood DNX9260BT - Manual (Page 84)

84 DNX series DNX9260BT/ DNX7260BT
Setup Menu
[Front Camera] Turn this setting on
when the CMOS-300 with ID2 set is
connected. (
"OFF")
[F-CAM Settings] Adjusts the CMOS-
300 with ID 2 set. For details, see the
option manual.
Navigation Setup Navigation Setup
You can set Navigation parameters.
1 Display the Navigation Setup screen
Touch [ ] > > [ ] > > [Navigation].
(page 68)
2 Set each item
[NAV Interrupt Speaker] Selects
speakers used for voice guidance of the
navigation system. (
"Front All")
"Front L": Uses the front left side
speaker for voice guidance.
"Front R": Uses the front right side
speaker for voice guidance.
"Front All": Uses both front speakers for
voice guidance.
[NAV Voice Volume] Adjusts the
volume for voice guidance of the
navigation system.
(
DNX series: "25", DDX series: "21")
[NAV Mute] Mutes the volume of rear
speakers during voice guidance of the
navigation system. (
"ON")
When turned "ON", the volume level
drops for voice guidance.
[Navigation Input] Selects a navigation
system connection. ( "RGB") (DDX
series only)
"RGB": Allows the Kenwood’s
Navigation System to connect via its
interface cable.
B64-4676-00_01_E_English.indd 84 B64-4676-00_01_E_English.indd 84 10/02/05 15:27 10/02/05 15:27