Kenwood KMR-700U - Manual (Page 9)

English | 9
Display Settings
Display Type Selection
Shown below are examples of display types.
Display Display Type
“TYPE [A]” Displays 4 lines of text.
“TYPE [B]” Displays 3 lines of text and the status (ON/OFF
indicator for each function).
“TYPE [C]” Displays 3 lines of text.
“TYPE [D]” Displays 2 lines of text and the status (ON/OFF
indicator for each function).
1 Enter Display setup mode
Press the [DISP] button.
2 Select the Display type select item
Tune the [VOL] knob.
Select the “Type Select” display.
3 Enter Display type select mode
Press the [ENTER] button.
4 Select the Display type
Tune the [VOL] knob.
5 Exit Display type select mode
Press the [DISP] button.
To exit the display setup mode, press the [DISP]
button for at least 1 second.
⁄
• The source icon and the text title at left side of the
display can be changed.
• To change the text to be displayed, refer to
Selection> (page 10).
Display Side Selection
Setup the left side of the display.
1 Enter Display setup mode
Press the [DISP] button.
2 Select the Display side select item
Tune the [VOL] knob.
Select the “Side Select” display.
3 Enter Display side select mode
Press the [ENTER] button.
4 Select the Display side
Tune the [VOL] knob.
You can select among the title of the displayed
text, icon for the source being played, and none.
5 Exit Display side select mode
Press the [DISP] button.
To exit the display setup mode, press the [DISP]
button for at least 1 second.
B64-4406-00_00_KMR-700U_K_en.indd 9 B64-4406-00_00_KMR-700U_K_en.indd 9 09.2.16 11:00:09 AM 09.2.16 11:00:09 AM