beautypg.com
8
|
KMR-700U
*Factory setting** Refer to
Displayed item is depending on currently selected source or mode. The mark in Condition column shows the condition to which the item is displayed.
: Can be set during USB source. : Can be set only during playback of the iPod source. : Can be set during Tuner source. : Can be set during FM reception. : Can be set while accessing AUX source. : Can be set during Satellite radio source.
— : Can be set during all sources.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• Only the items available to the current source are
displayed.
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF.
Menu System
Set up the following functions.
1
Enter menu mode
Press the [
] button for at least 1 second.
“MENU” is displayed.
2
Select the menu item
Tune the [VOL] knob.
3
Set the menu item
Press the [ ] or [ ] button.Usually, menu items are set by pressing the [ ] or [ ] button. Some items, however, requires that the [ENTER] button being pressed for at least 1 or 2 seconds, before the settings can be made.
1 sec.
or
2 sec.
icon is displayed in the “Entry” column for
such an item.
4
Exit menu mode
] button.
Item
Setting
Entry
Setting overview
Condition Page
“Skip Search”
“0.5%”*/ “1%”/ “5%”/ “10%”
Sets the ratio of skip performed with .
12
“Beep”
“OFF”/ “ON”*
Setting the operation check sound (beep sound) ON/OFF.
—
“Clock Adjust”
Sets the clock.
5
“Date Adjust”
Sets the date.
“Date Mode”
Sets the date display format.
“ILM Dimmer”
“Auto”*/ “Manual”/ “OFF”
Sets whether the key illumination is dimmed in conjunction with the light switch of the vessel or it is dimmed constantly.
**
“ILM Effect”
Sets whether the key illumination brightness is changed in conjunction with the key operation.
“DISP Dimmer”
Sets whether the display illumination is dimmed in conjunction with the light switch of the vessel or it is dimmed constantly.
“Contrrast”
“1” – “10”
Adjusting the display contrast.
“DISP N/P”
“POSI 1”/ “2” / “NEGA 1”/ “2”
Switches the panel display between positive or negative.
“AMP”
Turns on/off the built-in amplifier.
“Supreme”
Turns ON/OFF the Supreme function.
“Seek Mode”
“Auto1”*/ “Auto2”/ “Manual”
Selects the tuning mode of the radio.
“Channel”*/ “Preset”
Sets the seek mode of satellite radio.
19
“Auto Memory”
Memorizes six stations with good reception automatically.
11
“CRSC”
Switches to Monaural to decrease noise when reception is poor.
“ESN=”
Displays the Electronic Serial Number of satellite radio.
“Name Set”
Sets the display when switched to AUX source.
10
“Scroll”
“Auto”*/ “Manual”
Specifies whether the text is scrolled automatically.
“Favorite Delete”
Deletes Favorite Preset Memory.
17
“Built in AUX”
Sets whether to display AUX during source selection.
“Audio Preset”
Registering the value setup by Audio Control.
15
“Backup MEM DEL”
Initializes the settings of “MENU”, etc.
16
“SYS F/W VER”
Display the firmware version and update the firmware.
B64-4406-00_00_KMR-700U_K_en.indd 8
09.2.16 11:00:09 AM
