Appendix – Kenwood KMR-700U User Manual

Page 22

KMR-700U

Menu Glossary

• AMP
Selecting “OFF” turns off the built-in amplifier.

Turning off the built-in amplifier improves the
quality of the sound from Preout.

• ILM

Dimmer

Reduces the key Illumination brightness.
Auto: Dims the illumination in conjunction with the

Light switch of the vehicle.

Manual: Dims the illumination constantly.
OFF: Does not dim the illumination.
• DISP

Dimmer

Reduces the display Illumination brightness.
Auto: Dims the illumination in conjunction with the

Light switch of the vehicle.

Manual: Dims the illumination constantly.
OFF: Does not dim the illumination.
• DISP

N/P

Switches the panel display between positive

or negative. In addition, you can reverse it in
conjunction with the interior light.

POSI1 : Displays the text in the positive.
POSI2 : When the interior light is off, the text is

displayed in the positive; when the interior
light is on, the text is displayed in the
negative.

NEGA1 : Displays the text in the negative.
NEGA2 : When the interior light is off, the text

is displayed in the negative; when the
interior light is on, the text is displayed in
the positive.

•

Seek

Mode

Select a tuning mode of the radio.

Tuning mode

Display

Operation

Auto seek

“Auto1”

Automatic search for a station.

Preset station seek

“Auto2”

Search in order of the stations in the
Preset memory.

Manual

“Manual” Normal manual tuning control.

• Supreme
Technology to extrapolate and supplement with

proprietary algorithm, the high-frequency range
that is cut off when encoding at low bit rate (less
than 128Kbps, Sampling frequency is 44.1kHz).
Supplementing is optimized by compression
format (AAC, MP3 or WMA) and processed
according to bit rate.
The effect is negligible with music that is encoded
at high bit rate, variable bit rate or has minimal high
frequency range.

Appendix

2CAUTION

Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
In compliance with Federal Regulations, following
are reproductions of labels on, or inside the product
relating to laser product safety.

Kenwood Corporation
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI
TOKYO, JAPAN

KENWOOD CORP. CERTIFIES THIS EQUIPMENT
CONFORMS TO DHHS REGULATIONS N0.21 CFR
1040. 10, CHAPTER 1, SUBCHAPTER J.

Location : Bottom Panel

FCC WARNING

This equipment may generate or use radio
frequency energy. Changes or modifications to this
equipment may cause harmful interference unless
the modifications are expressly approved in the
instruction manual. The user could lose the authority
to operate this equipment if an unauthorized change
or modification is made.

FCC NOTE

This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment may cause harmful interference to radio
communications, if it is not installed and used in
accordance with the instructions. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the receiver is
connected.

• Consult the dealer or an experienced radio/TV

technician for help.

B64-4406-00_00_KMR-700U_K_en.indd 22

09.2.16 11:00:11 AM