Connecting wires to terminals – Kenwood KMR-700U User Manual
Page 24
24
|
KMR-700U
Connecting Wires to Terminals
P.CONT
SUB
REAR
PRE OUT
FRONT
AUX IN
HEAD UNIT
POWER
ANTENNA
SIRIUS I/F
REMOTE CONTROL
ILLUMI
R
R
R
R
L
L
L
L
Battery
Ground wire (Black) - (To car chassis)
FM/AM antenna input*
Fuse
(15A)
I/F cable (Accessory2)
Wiring harness
(Accessory1)
Ignition wire (Red)
Battery wire (Yellow)
ACC
Fuse box
If no connections are made, do not let the wire come out from the tab.
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
White/Black
White
Gray/Black
Gray
Green/Black
Green
Purple/Black
Purple
Ignition key switch
Fuse box
(Main fuse)
Power control/Motor antenna control wire
(Blue/White)
Connect either to the power control terminal when
using the optional power amplifier, or to the antenna
control terminal in the vehicle.
Secure the I/F cable (Accessory 2)
with a Clamper (Accessory 6).
Main unit
KCA-RC107MR
(Optional accessory;
Maximum of 3 remote controls)
To SIRIUS
unit*
To Remote
control*
Subwoofer preout
Rear preout
Front preout
Aux input
Dimmer control wire (Orange / White)
To car light control switch
* Terminals are provided
with covers. Remove the
cover from the terminal
before connecting it to
the cable.
Clamper
(Accessory6)
B64-4406-00_00_KMR-700U_K_en.indd 24
B64-4406-00_00_KMR-700U_K_en.indd 24
09.2.16 11:00:11 AM
09.2.16 11:00:11 AM