Kenwood DDX4025BT - Manual (Page 5)

ENGLISH 5
INITIAL SETTINGS INITIAL SETTINGS
R Activating the security function
You can activate the security function to protect
your receiver system against theft.
1 Display the setting screen.
On the screen:
2
The security indicator on the monitor panel
flashes when the vehicle ignition is off.
To deactivate the security function: Select [OFF]
for .
Clock settings
1 Display the screen.
On the source control screen:
2 Display the screen.
3 Display the screen.
4 Set the clock time.
1 Synchronizes the clock time with
the connected navigation unit.
System>
Synchronizes the clock time with
FM Radio Data System .
* 2 Synchronizes the clock time with
the digital radio (DAB).
Sets the clock manually. (See
below.)
When selecting :
Adjust the hour (1), then adjust the minute (2).
• Press [Reset] to set the minute to “00”.
5 Finish the procedure.
* 1 Appears only when the navigation unit is connected.
* 2 Only for DDX4025DAB.
DDX_Entry_E.indb 5 DDX_Entry_E.indb 5 2013/10/30 13:54 2013/10/30 13:54