Kenwood DDX4025BT - Manual (Page 35)

ENGLISH 35
BLUETOOTH BLUETOOTH
R Setting items
Device>
Shows the connected phone device
name.
Response>
• ON: The unit answers the incoming
calls automatically in 5 seconds.
• OFF (Initial): The unit does not
answer the calls automatically.
Answer the calls manually.
Notify>
• ON : The unit informs you of the
arrival of a message by ringing and
displaying “Receiving Message”.
• OFF (Initial): The unit does not
inform you of the arrival of a
message.
Mode>
• System (Initial): The ring tone set on
the unit is used.
• Phone: The ring tone set on the
mobile phone is used. (This function
may not work depending on the
mobile phone.)
Change>
When is set to
, press [Enter], then select
the ring tone for received calls and
SMS from (Initial), ,
.
• Call Tone: Selects the ring tone for
phone calls.
• Message Tone: Selects the ring
tone for SMS.
Using the Bluetooth audio player
• To register a new device, see page 28.
• To connect/disconnect a device, see page 30.
R Indications and buttons on the source
control screen
1 2 3
• The operation buttons, indications and
information displayed on the screen differ
depending on the connected device.
Playback information
1
Playback status (I: play/W: pause)*
2 Playing time*
3 Tag data (current track title/artist name/album
title)*
• Pressing [<] scrolls the text if not all of the text
is shown.
Operation buttons
[W] Pauses playback.
[I] Starts playback.
[S] [T] • Selects a track. (Press)
• Reverse/forward search.* (Hold)
[MENU] Displays the screen.
* Available only for the devices compatible with AVRCP 1.3.
DDX_Entry_E.indb 35 DDX_Entry_E.indb 35 2013/10/30 13:54 2013/10/30 13:54