Kenwood DDX4025BT - Manual (Page 42)

42
SETTINGS SETTINGS
Setting menu items
R Displaying the menu screen
• You cannot change the settings
screen when [STANDBY] is selected on the
. (page 7)
• You can change the in the
setting only when [STANDBY] is
selected on the . (page 7)
R setting screen
Fader: Adjust the front and rear speaker output
balance.
• F6 to R6 (Initial: 0)
– When using a two-speaker system, set the fader
to the center (0).
Balance: Adjust the left and right speaker output
balance.
• L6 to R6 (Initial: 0)
Press [J]/[K]/[H]/[I] or drag [ ] to adjust.
– To clear the adjustment, press [Center].
Change the sound mode or adjust and store the
equalization for each source. (Page 36)
• Natural (Initial)/Rock/Pops/Easy/Top40/Jazz/
User
You can activate/deactivate loudness.
• ON (Initial): Boost low and high frequencies to
produce a well-balanced sound at a low volume
level. The LOUD indicator lights up.
• OFF: Cancels.
Adjust the crossover frequency. (Page 37)
< Volume Offset>
Adjust and store the auto-adjustment volume level
for each source. (For discs, the adjustment is stored
for each of the following categories: DVD /VCD, CD,
and DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC.) The
volume level will automatically increase or decrease
when you change the source.
–15 to +6 (Initial: 0 )
• ON (Initial): Activates the subwoofer.
• OFF: Deactivates the subwoofer.
Select the size of the connected speaker.
• Standard (Initial)/Narrow/Middle/Wide
09_Settings.indd 42 09_Settings.indd 42 2013/11/11 15:48 2013/11/11 15:48