Kenwood DDX4025BT - Manual (Page 4)

4
INITIAL SETTINGS INITIAL SETTINGS
Initial setup
When you power on the unit for the first time or
reset the unit, the initial setting screen appears.
• You can also change the settings on the
screen. (Page 42)
1
(Page 44)
Select the text language used for
on-screen information.
• Set to
display the operation buttons
and menu items in the
selected language ([Local]:
initially selected) or English
([English]).
(Page 43)
Select an external component
connected to the iPod/AV-IN2
input terminal to play.
Interrupt>
(Page 43)
Select [On] when connecting
the rear view camera.
Color>
(Page 43)
Select the color of the buttons
on the monitor panel.
2 Finish the procedure.
The screen is displayed.
Setting the security function
You can set a security code to protect your receiver
system against theft.
R Registering the security code
1 Display the screen.
On the source control screen:
2 Display the setting screen.
3 Display the screen.
• To clear the registered security code, perform
steps 1 and 2, then press [CLR] in
Code>.
4 Enter a four-digit number (1), then
confirm the entry (2).
• Press [Clear] to delete the last entry.
• Press [Cancel] to cancel the setting.
5 Repeat step 3 to confirm your security
code.
Now, your security code is registered.
• When the unit is being reset or disconnected from
the battery, you are required to enter the security
code. Enter the correct security code, then press
[Enter].
DDX_Entry_E.indb 4 DDX_Entry_E.indb 4 2013/10/30 13:54 2013/10/30 13:54