Kenwood DDX4025BT - Manual (Page 44)

44
SETTINGS SETTINGS
R setting screen
* 1
Select the text language used for on-screen
information.
• English (initial for DDX4025DAB/DDX4025BT/
DDX3025)/Spanish/French/German/Italian/
Dutch/Russian (initial for DDX4055BT/DDX3055/
DDX355)/Portuguese/Chinese-Simplified/
Chinese-Traditional/Thai/Turkish/Arabic/
Persian/Hebrew/Greek/Indonesia/Korean
– For external monitors, only English/Spanish/
French/German/Italian/Dutch/Russian/
Portuguese are available. If another language
has been selected, the text language for external
monitors will be set to English.
• GUI Language: Select a language used for
displaying operation buttons and menu items.
– English (Initial)/Local (the language selected
above)
< Clock>
Adjust the clock time. (Page 5)
• ON (Initial): Activates the key-touch tone.
• OFF: Cancels.
• ON (Initial): Activates the remote sensor.
• OFF: Cancels.
< SETUP Memory>
You can memorize, recall, or clear the settings you
have made. (Page 40)
*
2
Configure settings for using a Bluetooth device, such
as connection and other general operations.
• Paired Device List: Press [Enter] to show the list
of the registered devices. You can connect the
device or delete the registration. (Page 30)
• PIN Code: Changes the PIN code of the unit.
(Page 29)
• Device Name: Shows the device name to be
shown on the Bluetooth device— KENWOOD BT
MM-8U2.
• Device Address: Shows the device address of the
unit.
• Auto Connect:
– ON (Initial): The connection is automatically
established with the last connected Bluetooth
device when the unit is turned on.
– OFF: Cancels.
• Bluetooth HF/Audio: Select the speakers used for
Bluetooth (both phone and audio player).
– Front Only (Initial): From front speakers only.
– All : From all speakers.
• Auto Pairing:
– ON (initial): Establishes the pairing automatically
with the connected iOS device (such as iPhone)
even if the Bluetooth function is deactivated on
the device. (Auto pairing may not work for some
devices depending on the iOS version.)
– OFF: Cancels.
• Initialize: Hold [Enter] to initialize all settings you
have made for using Bluetooth mobile phone and
Bluetooth audio player.
• L-Band Tuning:
– ON: Receives the L-Band witdth during Digital
Audio reception.
– OFF (initial): Cancels
• Antenna Power:
– ON (initial): Supplies the power to the DAB
aerial.
– OFF: Cancels
* 2
Assigns the function of the TEL button when held.
• V-OFF: Turns off the screen. (Page 8)
• VOICE (initial): Activates voice dialing. (Page 33)
• R-CAM: Displays the picture from the rear view
camera. (Page 26)
* 3
Assigns the function of the AUD button when held.
• V-OFF (initial ): Turns off the screen. (Page 8)
• R-CAM : Displays the picture from the rear view
camera. (Page 26)
This unit has its own Registration Code. Once you
have played back a file with the Registration Code
recorded, this unit’s Registration Code is overwritten
for copyright protection.
• Press [Enter] to display the information.
• To return to the previous screen, press [OK].
Activate or deactivate the security function.
(Page 4)
Displays the serial number.
Adjust the touch position of the buttons on the
screen. (Page 41)
Register the security code for the unit. (Page 4)
Displays the version information of the software.
You can update the software. (Page 41)
* 1 “Please Power Off” appears when the setting is changed. Turn off
the power, then turn on to enable the change.
* 2 Only for DDX4025DAB/DDX4025BT/DDX4055BT .
* 3 Only for DDX3025/DDX3055/DDX355 .
DDX_Entry_E.indb 44 DDX_Entry_E.indb 44 2013/10/30 13:54 2013/10/30 13:54