Kenwood DDX4025BT - Manual (Page 41)

ENGLISH 41
SETTINGS SETTINGS
R Locking the settings
You can lock the settings to prevent them from
being changed.
• is shown beside the settings that can be
locked.
1 Display the screen.
(Page 40)
2
To unlock the setting: Press [Unlock].
R Updating the system
You can update the system by connecting a USB
device containing an update file.
• For updating the system, visit < http://www2.
jvckenwood.com/cs/ce/>.
1 Create an update file, copy it to a USB
device, and connect it to the unit.
• To connect a USB device, see page 52 .
2 Display the
screen.
On the screen:
3
< Application
Version>
Updates the system
application.
Updates the DVD system
application.
< System
Version>
Updates the system.
< Bluetooth
Version>* 1
Updates the Bluetooth
application.
Version>* 2
Updates the Digital Radio
(DAB) module application.
It may take a while.
If the update has been completed successfully,
“Update Completed” appears. Reset the unit.
• If the update has failed, turn the power off and
then on, and retry the update.
• Even if you have turned off the power during the
update, you can restart the update after the power
is turned on. The update will be performed from
the beginning.
* 1 Only for DDX4025DAB/DDX4025BT/DDX4055BT .
* 2 Only for DDX4025DAB.
R Adjusting the touch position
You can adjust the touch position on the touch
panel if the position touched and the operation
performed do not match.
1 Display the setting screen. (See
the far left column.)
2 Display the screen.
3 Touch the center of the marks at the lower
left and at the upper right as instructed.
• To reset the touch position, press [Reset].
• To cancel the current operation, press
[Cancel].
DDX_Entry_E.indb 41 DDX_Entry_E.indb 41 2013/10/30 13:54 2013/10/30 13:54