Kenwood DDX4025BT - Manual (Page 37)

ENGLISH 37
SETTINGS SETTINGS
R Adjusting the crossover frequency
1 Display the < X’over> screen.
On the screen:
2 Select the item to adjust (1), then make
adjustments (2).
Adjusts the crossover for the
front ([Front]) or rear ([Rear])
speakers (high pass filter).
Adjusts the crossover for the
subwoofer (low pass filter).* 1
< Level> Adjusts the subwoofer level.
Selects the phase for the
subwoofer.* 2
Adjusts the crossover frequency.
* 1 Adjustable only when the subwoofer is activated. (Page 42)
* 2 Not selectable when is set to .
Adjustment for video playback
R Adjusting the picture
You can adjust the picture quality.
1 Display the adjustment menu.
2 Select [DIM ON ] (dimmer on) or [ DIM OFF]
(dimmer off).
3 Adjust the picture (–15 to +15).
Adjusts the brightness.
Adjusts the contrast.
Adjusts the blackness.
Adjusts the color.
* Adjusts the tint.
Adjusts the sharpness.
* Adjustable only when the incoming signal is NTSC.
DDX_Entry_E.indb 37 DDX_Entry_E.indb 37 2013/10/30 13:54 2013/10/30 13:54