Kenwood KRF-V5450D - Manual (Page 35)

English
35
L
ist
en
in
g t
o
r
a
d
io broa
d
ca
sts
Presetting radio stations
manually
The RDS auto memory function assigns preset numbers to RDS
stations starting from preset number "1". Therefore, be sure
to execute the RDS auto memory function before using the
following operations to manually store AM stations and other FM
stations, and RDS stations.
See .
MULTI CONTROL
O/
MEMORY
1
Tune in the station you want to store.
2
Press [MEMORY] while receiving the station.
Proceed to step 3 within 20 seconds.
If more than 20 seconds elapse, press [MEMORY] again.
3
Use [MULTI CONTROL ∞/5] to select one of the
station presets (1 – 40).
4
Press [MEMORY] to confirm the setting.
Repeat steps 1 to 4 to store as many stations as necessary.
If you store a station at a previously used preset, the
previous station will be replaced by the new one.
Receiving preset stations
TUNER
1
Press [TUNER] to select tuner as the source.
2
Enter the number of the preset station you want to
receive (up to "40" preset numbers).
Press the Numeric keys in the following order:
For preset No.15: [+10] and [5]
For preset No.20: [+10], [+10] and [0]
Preset number
• If you make a mistake entering a two digit number, press
[+10] repeatedly to return to the original display and start
again.
Numeric keys
B60-5810-08_00_EN.indd 35 B60-5810-08_00_EN.indd 35 09.7.24 9:05:25 AM 09.7.24 9:05:25 AM