Kenwood KRF-V5450D - Manual (Page 33)

English
33
L
ist
en
in
g t
o
r
a
d
io broa
d
ca
sts
This unit can store up to 40 stations in the memory and recall
them by one-touch operation.
Radio stations can be classified into RDS (Radio Data System)
stations and other stations. To listen to or store RDS stations in
the preset memory see
›.
Be sure to connect antennas to receive radio broadcasts. (See
).)
INPUT SELECTOR AUTO/MONO
AUTO/MONO BAND
TUNER
BAND
TUNING
/Y
MULTI CONTROL
MULTI CONTROL
O/
1
Set the input source to TUNER.
2
Use [BAND] to select the broadcast band.
Each press switches the band as follows:
1 FM
2 AM
3
Use [AUTO/MONO] to select the tuning method.
Each press switches the tuning method as follows:
Setting Operation Indicator
Auto tuning The next station is tuned automatically. "AUTO" lit
Manual tuning Select a station manually. "AUTO" not lit
Normally, set to "AUTO" (auto tuning). If the radio waves are
weak and there is a lot of interference, switch to manual
tuning. (With manual tuning, stereo broadcasts will be
received in monaural.)
4
Use [TUNING
1/¡] to select the station.
"TUNED" lights when a broadcast is being received.
"ST" lights when a broadcast is being received in stereo.
• [MULTI CONTROL ∞/5] can also be use to select a
station.
Tuning into a radio station
B60-5810-08_00_EN.indd 33 B60-5810-08_00_EN.indd 33 09.7.24 9:05:24 AM 09.7.24 9:05:24 AM