beautypg.com

Preparation for playing music or movie, Turning on the power, Setting the speaker system – Kenwood KRF-V5450D User Manual

Page 28: Selecting the input mode

background image

28

KRF-V6400D/KRF-V5450D

P

la

y

in

g m

u

si

c o

r mo

vi

e

SPEAKERS
ON/OFF

LISTEN MODE

INPUT MODE

INPUT SELECTOR

RECEIVER

LISTEN MODE

Turning on the power

Turning on the power

1

Turn the connected monitor and player component

ON.

2

Press [

RECEIVER] (remote control unit) or [

]

(main unit) to turn on the unit.

Setting the speaker system

Setting the speaker system

Press [SPEAKERS ON/OFF] to select the speaker
system(s) to be used.

"SP" indicator lights up when turning on the speaker system.

Selecting the input mode

Selecting the input mode

When playing a component connected to the digital input
terminal (CD, VIDEO or DVD) or the HDMI input terminal (HDMI
1 or HDMI 2), set the input mode to match the type of the audio
input.

1

Use [INPUT SELECTOR] to select "HDMI 1", "HDMI

2", "DVD", "VIDEO" or "CD" input source.

2

Press [INPUT MODE] to select the input mode.

Each press switches the mode as follows.

When in HDMI 1 or HDMI 2 input source

Display

Setting

"AUTO"

The digital and analog inputs are switched automatically
according to the input signal. When a digital input is detected,
the decode mode is also switched according to the signal type
(Multi-channel PCM/Dolby Digital/DTS).

"MANUAL"

The input mode is fixed at digital to accelerate the input signal
processing and eliminate lack of audio at the beginning of
playback.
The decode mode is also fixed according to the type of the
signal to be played.

When in DVD, VIDEO or CD input source

Display

Setting

"AUTO"

The digital and analog inputs are switched automatically
according to the input signal. When a digital input is detected,
the decode mode is also switched according to the signal type
(PCM/Dolby Digital/DTS).

"MANUAL"

The input mode is fixed at digital to accelerate the input signal
processing and eliminate lack of audio at the beginning of
playback.
The decode mode is also fixed according to the type of the
signal to be played.

"ANALOG"*

1

The input mode is fixed at analog.
This is selected for playback of analog player components.

*

1

This cannot be selected when in DTS play mode.

• The "AUTO DETECT" indicator lights when "AUTO" is

selected.

• If the audio is lost as a result of change in the input signal

while "MANUAL" is selected, press [LISTEN MODE].

Input source keys

Preparation for playing music or movie

B60-5810-08_00_EN.indd 28

B60-5810-08_00_EN.indd 28

09.7.24 9:05:20 AM

09.7.24 9:05:20 AM

This manual is related to the following products: