Kenwood KRF-V5450D - Manual (Page 26)

26
KRF-V6400D/KRF-V5450D
Set
u
p
The HDMI setup is required to use the component connected to
the HDMI terminal or to use the HDMI control functions.
MULTI CONTROL
O/
HDMI SETUP
HDMI SETUP
MULTI CONTROL
HDMI setup flow HDMI setup flow
The HDMI control functions can be set.
1
Enter the HDMI Setup mode.
[HDMI SETUP]
Use [MULTI CONTROL ∞/5] to select an item to set.
[HDMI SETUP]
Display Setting
"AUDIO OUT" Sets the HDMI audio output destination.
"LIP SYNC" (KRF-V6400D only)
Adjusts the deviation in time between
the output audio and video.
"LINK SET"
Sets whether or not the HDMI control
functions are used.
"POWER CONTROL"* 1
Interlocks power ON-OFF of components
by means of HDMI control.
"EXIT" Exits the HDMI Setup mode.
* 1 This item can be set when "LINK SET" is set to "ON".
2
Set each item.
See the followings for each HDMI control item.
Audio Out Audio Out
This function selects whether the output destination of the audio
input is the TV or this unit.
1
Select "AUDIO OUT".
[HDMI SETUP]
Use [MULTI CONTROL ∞/5].
[HDMI SETUP]
2
Set the HDMI audio output destination.
[MULTI CONTROL ∞/5]
[HDMI SETUP]
Display Setting
"AMP" Outputs the audio from the speakers connected to this unit.
"TV" Outputs the audio from the TV connected to this unit.
3
Go to the next setting.
• If "TV" is selected and the audio is not output or is
interfered with by noise, set the audio output of the
player component to PCM.
• If "TV" is selected, adjust the volume on TV.
HDMI setup
B60-5810-08_00_EN.indd 26 B60-5810-08_00_EN.indd 26 09.7.24 9:05:18 AM 09.7.24 9:05:18 AM