Kenwood K-511USB-B - Manual (Page 45)

88 K-511USB/RD-K511USB 89 English
Setting the recording level
(REC LEVEL)
If the audio recorded in the component connected
to the [
USB]/[REC IN] terminal or in the SD
card is distorted or its level is too low, adjust the
recording level.
1
Select "REC LEVEL".
Press [MULTI CONTROL A/B]
to select, then press [ENTER].
2
Select the audio source you want to
change the recording level.
Press [MULTI CONTROL A/B].
Each press switches the selection.
SD1/SD2/USB
The display returns to
the "REC SETUP" display.
Setting of [REC OUT]
Setting of SD1/SD2/USB
REC OUT
RETURN
3
Enter the selection of audio source.
Press [ENTER].
4
Adjust the recording level.
Press [MULTI CONTROL A/B].
Making the recording setup using the Setup menu
Setting the recording input
(REC INPUT)
When recording a CD in SD/USB, this item is used
to select whether digital recording is performed to
record the digital output signal or analog recording
is performed to record the analog output signal.
1
Select "REC INPUT".
Press [MULTI CONTROL A/B]
to select, then press [ENTER].
2
Select the recording input.
Press [MULTI CONTROL A/B].
Each press switches the selection.
DIGITAL
ANALOG
Analog recording
Digital recording
3
Enter the selection.
Press [ENTER].
When a digital copy-controlled CD is recorded, the REC
INPUT is switched automatically to "ANALOG".
•
OFF
Manual fi le division.
ON
Automatic fi le division.
3
Enter the selection.
Press [ENTER].
4
Divide the fi le.
When OFF is selected
When the point you want to divide comes during
recording,
Press [ENTER].
Each press creates a new fi le.
When ON is selected
Set the interval for fi le division in minute. For
details, see "Dividing fi les automatically (DIVIDE
TIME)". (page 90)
When recording from radio broadcasting, the fi le is
divided at the intervals set with DIVIDE TIME. (page 90)
When recording from a component connected to
iPod/D.AUDIO or AUX, the fi le is divided every time a no-
sound condition has lasted for 3 seconds or more.
•
•
SD1/SD2/USB
The recording level can be adjusted as desired in
the range between "−2" and "+2".
Example) When REC
LEVEL is set to "+2"
REC OUT
Select "HIGH" or "LOW" as desired.
Example) When REC
LEVEL is set to "HIGH"
5
Enter the selection.
Press [ENTER].
ワンタッチエディット録音のときは、録音レベルは
調整できません。
Setting the fi le division method
(AUTO DIVIDE)
When recording radio broadcasting, etc. in SD/USB,
this item is used to set whether the fi le is divided
automatically or manually.
1
Select "AUTO DIVIDE".
Press [MULTI CONTROL A/B]
to select, then press [ENTER].
2
Select the division method.
Press [MULTI CONTROL A/B].
Each press switches the selection.
•
Rec
o
rding S
etup