Kenwood K-511USB-B - Manual (Page 24)

46 K-511USB/RD-K511USB 47 English
Listening to Radio Broadcasting
Presetting stations manually
(Manual Preset)
The FM/AM station being tuned can be preset in
memory by specifying the preset No. If a station
is preset in a preset No. in which another station
has already been preset, the existing setting is
overwritten and replaced with the new setting.
1
Tune the radio station to be preset
in memory.
Tune with auto tuning or manual tuning. (page
44)
2
Enter the tuned station.
Press [ENTER].
3
Select the desired preset number
(P01 to P40).
Press [ G/H].
Press [MULTI CONTROL C/D].
When preset No. P35 is
selected:
The preset number can also be entered directly.
Press the numeric button(s) to select.
To select preset No. P35
Press [+10] three times and [5] once.
•
4
Preset a radio station.
Press [ENTER].
To preset other stations, repeat steps 1 to 4 for each
of them.
Even when a station is preset, it cannot be tuned if the
radio wave condition is poor.
•
•
Presetting stations
automatically (Auto Preset)
Radio stations can be preset automatically in
preset channels.
Stations cannot be preset if other audio source is
selected.
Up to 40 stations can be preset in the system.
Select the FM or AM band.
For use of the RDS function, stations must be
memorized by AUTO MEMORY.
1
Enter the Tool menu.
Press [TOOL].
2
Select "AUTO MEMORY".
Press [MULTI CONTROL A/B]
to select, then press [ENTER].
The station is preset
in memory and the
system enters the status
of reception of preset
station No. P01.
"AUTO MEMORY" blinks on the display and the
receivable radio stations are preset automatically.
RDS stations are given priority during auto presetting. If
there is memory left after presetting, this unit continues
presetting regular FM and AM stations.
A broadcast station that cannot be preset with AUTO
MEMORY should be set with Manual preset. (page 45)
•
•
•
•
•
•
Pla
ying music tracks