Kenwood K-511USB-B - Manual (Page 39)

76 K-511USB/RD-K511USB 77 English
3
Start formatting.
Select "CANCEL" to cancel formatting.
Press [MULTI CONTROL A/B]
to select, then press [ENTER].
4
Enter the selection.
A message is displayed
to solicit reconfi rmation
of the formatting.
Press [ENTER].
After completion of formatting, the display returns to
the "SYSTEM SETUP" display.
Formatting is impossible if the SD card contains a copy
of the AMG database.
Formatting may take long time with certain types of SD
card.
•
•
•
Setting Auto Power Save (A.P.S.)
The A.P.S. (AUTO POWER SAVE) function switches
the system OFF automatically when it has not been
operated for more than 30 minutes while its power
is ON and the CD or SD is in stop mode.
1
Select "A.P.S.".
Press [MULTI CONTROL A/B]
to select, then press [ENTER].
2
Set the A.P.S. mode to ON/OFF.
Press [MULTI CONTROL A/B]
to select, then press [ENTER].
Each press switches ON/OFF.
"A.P.S." lights when ON is
set.
When the A.P.S. mode is ON
A.P.S. is activated when the system is in the
following status.
The selected audio source is TUNER, AUX or iPod/
D.AUDIO, the volume is set to "0" and no button is
pressed
CD, SD1, SD2 and USB are in stop mode and no
button is pressed.
■
•
•
Adjusting the Time
(TIME ADJUST)
The day of the week and the time of the day of the
system can be set.
1
Select "TIME ADJUST".
Press [MULTI CONTROL A/B]
to select, then press [ENTER].
2
Set the day of the week, hour and
minute.
Selecting the setting item from day of
week, hour and minute
Press [MULTI CONTROL C/D].
Each press switches the selection.
Day of Week
Hour
Minute
The selected item lights up.
When "DAY OF WEEK" is
selected
When "MINUTE" is
selected
Setting the day of week, hour or
minute
Press [MULTI CONTROL A/B].
3
Enter the selection.
Press [ENTER].
The display returns to the "SYSTEM SETUP" display.
To display time of day when the system is OFF
(standby mode):
Press [STOP F].
The time of the day is
displayed for 5 seconds.
If the power cord is unplugged then plugged in or after
a power failure, adjust the time of the day again.
The clock operation involves a certain error. It is
recommended to adjust the time of the day periodically.
■
•
•
Making the system setup using the Setup menu
A
d
vanc
ed oper
ations