Kenwood K-511USB-B - Manual (Page 18)

34 K-511USB/RD-K511USB 35 English
3
Start playback.
Press [SD1 E] or
[SD2 E].
To clear a music fi le from the program
Stop playback and press [CLEAR]. Each press
clears the currently last track in the program.
To add an audio fi le in the program:
If playback is underway, stop it and perform steps
2 and after.
To cancel program playback:
Stop playback and press [P.MODE] to select the
normal play mode. The program is cleared at this
time.
The program is cleared when the system is turned OFF
or the SD card used in programming is disconnected.
Relay playback of two SD cards
Two SD cards can be played successively in order
from SD1 to SD2 or from SD2 to SD1.
Select the SD source and enter stop mode.
1
Select "RELAY PLAY" (relay play
mode).
Press [P.MODE].
Each press switches the selection.
Folder play mode
Program play mode PGM ON
N ON
Relay play mode RELAY PLAY ON
Normal play mode
Not lit
■
■
■
•
•
2
Start playback.
Press [SD1 E] or
[SD2 E].
To cancel relay playback:
Stop playback and press [P.MODE] to select the
normal play mode.
Intro Scan playback
Intro Scan plays the fi rst 10 seconds of every audio
fi le. This makes it possible to select the desired
audio fi le from the introduction part and play the
entire fi le in normal playback.
Select the SD source and enter stop mode.
1
Select the Intro Scan play mode.
Press [INTRO SCAN].
2
When the introduction of the
desired fi le is played, select it.
Press [ENTER].
Intro Scan playback completes and normal
playback starts.
Editing operations such as fi le deletion, renaming and
moving are possible even in the middle of Intro Scan
playback.
Intro Scan can also be started from the Tool menu. (page
70)
■
•
•
•
Folder play mode
The system can be set to a mode for playback
per folder.In this mode, the system plays only the
selected folder and stops after all of its fi les have
been played.
SD1 and SD2 can be set separately.
Select the SD source and enter stop mode.
1
Select "N" (folder play mode).
Press [P.MODE].
Each press switches the selection.
Folder play mode
Program play mode PGM lit
N lit
Relay play mode RELAY PLAY ON
Normal play mode
Not lit
2
Select the folder to be played.
Press [MULTI CONTROL].
For how to select it, see "Folders and fi les" on page
26.
3
Start playback.
Press [SD1 E] or
[SD2 E].
To cancel the folder play mode:
Stop playback and press [P.MODE] to select the
normal play mode.
•
•
■
Program playback
Audio fi les can be played in the order programmed
by the user.
Select the SD source and enter stop mode.
1
Select "PGM" (program play mode).
Press [P.MODE].
Each press switches the selection.
Folder play mode
Program play mode PGM lit
N lit
Relay play mode RELAY PLAY lit
Normal play mode
Not lit
2
Select a fi le.
Press [MULTI CONTROL] or the
numeric button(s) to select the fi le,
then press [ENTER].
Use [MULTI CONTROL] to select, then
press [ENTER].
When the 5th fi le "T004.
WMA" is selected as the
fi rst track of the program:
If you committed a mistake in selection, press
[CLEAR] on the remote control unit before
pressing [ENTER] and restart selection.
Up to 32 fi les can be programmed.
For how to select it, see "Folders and fi les" on page
26.
•
•
•
Playing an SD card
Pla
ying music tracks