beautypg.com

Changing the signal duration, Care and cleaning, Risk of short circuit – Siemens HF24G564 User Manual

Page 9: Risk of burns, Risk of electric shock, Do not use, Cleaning agents, Caution

background image

9

Changing the signal duration

You will hear an audible signal when the appliance is switched

off. You can change the duration of the signal.
To do so, press the

¹

button for approx. 6 seconds.

The new signal duration is adopted.

The clock reappears.
The following are possible:

Short signal duration - 3 tones

Long signal duration - 30 tones.

Care and cleaning

With careful care and cleaning your microwave oven will retain

its looks and remain good order. We will explain here how you

should care for and clean your appliance correctly.

:

Risk of short circuit!

Never use high-pressure cleaners or steam cleaners to clean
the oven.

:

Risk of burns!

Never clean the appliance immediately after switching off. Let
the appliance cool down.

:

Risk of electric shock!

Do not immerse the appliance in water or clean under a jet of
water.
Surfaces are different, and damage caused by using the wrong

cleaning agent can be avoided by observing the information in

the table below.

Do not use

sharp or abrasive cleaning agents.

The surface could be damaged. If such a substance comes

into contact with the front of the appliance, wash it off

immediately with water.

metal or glass scrapers to clean the glass in the appliance

door.

metal or glass scrapers for cleaning the seal.

hard scouring pads or cleaning sponges.

Wash new sponge cloths thoroughly before use.

cleaning agents with high concentrations of alcohol.

Cleaning agents

Caution!
Before cleaning, unplug the appliance from the mains or switch

off the circuit breaker in the fuse box. Clean the outside of the

appliance and the cooking compartment with a damp cloth and

mild detergent. Dry with a clean cloth.

Area

Cleaning agents

Appliance front

Hot soapy water:

Clean with a dish cloth and dry with a

soft cloth. Do not use glass cleaners or

metal or glass scrapers for cleaning.

Appliance front with

stainless steel

Hot soapy water:

Clean with a dish cloth and dry with a

soft cloth. Remove flecks of limescale,

grease, starch and albumin (e.g. egg

white) immediately. Corrosion can form

under such residues. Special stainless

steel cleaning agents can be obtained

from the after-sales service or from spe-

cialist shops. Do not use glass cleaners

or metal or glass scrapers for cleaning.

Cooking compart-

ment made of stain-

less steel

Hot soapy water or a vinegar solution:

Clean with a dish cloth and dry with a

soft cloth.

If the oven is very dirty: use oven

cleaner, but only when cooking com-

partment is cold. It is best to use a stain-

less-steel sponge. Do not use oven

spray or other aggressive oven cleaners

or abrasive materials. Scouring pads,

rough sponges and pan cleaners are

also unsuitable. These items scratch the

surface. Allow the interior surfaces to

dry thoroughly.

Recess in cooking

compartment

Damp cloth:

Ensure that no water seeps through the

turntable drive into the appliance inte-

rior.

Turntable and turnta-

ble ring

Hot soapy water:

When putting the turntable back in

place, make sure it slots in correctly.

Wire rack

Hot soapy water:

Clean using stainless steel cleaning

agent or in the dishwasher.

Door panels

Glass cleaner:

Clean with a dish cloth. Do not use a

glass scraper.

Seal

Hot soapy water:

Clean with a dish cloth, do not scour. Do

not use a metal or glass scraper for

cleaning.

Area

Cleaning agents