Siemens TE502206RW - Manual (Page 24)

20
de en
Problem Cause Solution
Display shows
Refill beans! although
the bean container (1) is
full, or the grinding unit
does not grind the beans�
Beans are not falling into
the grinding unit
(beans too oily)�
Gently tap the bean container
(1)�
Change the type of coffee if
necessary�
When the bean container (1) is
empty, wipe it with a dry cloth.
No hot water dispensed� The milk frother (6) is
soiled�
Clean the milk frother (6),
see “Maintenance and
daily cleaning”�
Too little or no milk froth. The milk frother (6) is
soiled�
Clean the milk frother (6),
see “Maintenance and
daily cleaning”�
Build-up of limescale in
the appliance�
Descale the appliance�
Milk unsuitable for
frothing�
Use low-fat milk (1�5 % fat)�
The milk frother (6) is not
correctly assembled�
Wet the milk frother parts and
press together firmly.
Coffee dispensing slows
to a trickle or stops
completely�
Coffee is ground too
finely. Pre-ground coffee
is too fine.
Adjust the grinding unit to a
coarser setting� Use coarser
pre-ground coffee.
Build-up of limescale in
the appliance�
Descale the appliance�
Coffee has no “crema”� Unsuitable type of coffee. Use a type of coffee with a higher
proportion of robusta beans.
The beans are no longer
fresh�
Use fresh beans�
The grinding setting is not
suitable for the beans.
Adjust grinding setting to fine.
Coffee is too “acidic”� The grinding setting is too
coarse or the pre-ground
coffee is too coarse�
Adjust the grinding unit to a finer
setting or use finer pre-ground
coffee�
Unsuitable type of coffee Use a darker roast�
Coffee is too “bitter”� The grinding setting is
too fine or the pre-ground
coffee is too fine.
Adjust the grinding unit to a
coarser setting or use coarser
pre-ground coffee.
Unsuitable type of coffee. Change type of coffee used.
If you are unable to solve the problem, please call the hotline.
Simple troubleshooting