Adjusting the grinding unit, Preparation using coffee beans – Siemens TE502206RW User Manual
Page 14
10
de
en
Adjusting the
grinding unit
The rotary selector (3) adjusts the grind
settings from coarse to fine.
¡
Warning
Adjust the grinding unit only while it is
running! Otherwise the appliance may be
damaged� Do not reach into the grinding
unit.
● While the grinding unit is running, adjust
the rotary selector (3) from fine (
a: Turn
anticlockwise) to coarse (
b: Turn clock-
wise) as required.
a
b
Note: The new setting will not become
apparent until after the second cup of
coffee�
Tip: For dark roast coffee beans, choose a
finer grind, for lighter beans a coarser grind.
Preparation using
coffee beans
This fully automatic espresso machine
grinds beans freshly for each brew�
Tip: If possible, use only beans for fully
automatic coffee and espresso machines.
For optimal quality, deep-freeze the beans
or store in a cool place in sealed containers�
Coffee beans can be ground while frozen.
Important: Fill the water tank (16) with
fresh water every day. The tank (16) should
always contain sufficient water for operating
the appliance�
Different coffee drinks can be prepared
quite simply at the press of a button.
Preparation
The appliance must be ready for use.
1� Place the pre-warmed cup(s) under the
coffee outlet (7).
Tip: For a small espresso, always pre-
heat the cup, e.g. using hot water.
2� Select the required coffee and the
required per-cup quantity by turning the
upper rotary knob (14). The selected
coffee and the per-cup quantity are
shown in the display�
3� Select the required coffee strength by
turning the lower rotary knob (13). The
selected coffee strength is shown in the
display�
4� Press the
start button (10)�
The coffee is brewed and then dispensed
into the cup(s).
Press the
start button (10) again to cut the
brewing process short�