Siemens TE502206RW - Manual (Page 19)

15
de en
Tips on energy saving
● The fully automatic espresso machine
switches off automatically after one hour
(factory setting). The default time of
one hour can be shortened (see “Menu
settings – Shut off” on page 9)�
● Switch off the fully automatic espresso
machine when not in use. To do this,
press the
e
off / j (12) button. The appli-
ance rinses and switches off�
● If possible, do not interrupt coffee or milk
froth dispensing. Cutting the coffee or milk
froth dispensing process short results in
higher energy consumption and in more
residual water collecting in the drip tray.
● Descale the appliance regularly to avoid
a build-up of limescale. Limescale residue
results in higher energy consumption.
Service Programmes
Depending on usage, the following
messages will appear on the display at
certain intervals:
Descale required!
or
Clean required!
or
Calc‘n‘Clean required!
The appliance should be cleaned or des-
caled immediately using the corresponding
programme. You also have the option
of combining both processes with the
Calc‘n‘Clean function (see “Calc‘n‘Clean”
on page 17)� If the service programme is not
run as instructed, the appliance may be
damaged�
¡
Warning
Each time you run the service programme,
you should follow the instructions for using
the descaling and cleaning agents� Please
observe the safety instructions on the pack-
aging of the cleaning agent�
Never interrupt the service programme!
Do not drink the liquids!
Never use vinegar, vinegar-based products,
citric acid or citric acid-based products!
Never put descaling tablets or other descal-
ing agents in the ground coffee drawer or
the drawer for cleaning tablets (4)!
Specially developed descaling and
cleaning tablets are available from retail-
ers or customer service.
Order number Retail Customer
service
Cleaning
tablets
TZ60001 310575
Descaling
tablets
TZ60002 310967