Water filter – Siemens TE502206RW User Manual
Page 12
8
de
en
Water filter
A water filter can prevent scale buildup.
Before a new water filter is used, it must be
rinsed. To do this, proceed as follows:
1� Press the water filter firmly into the
water tank with the aid of the measuring
spoon (18)�
2� Fill the water tank (16) with water up to
the
max mark�
3� Press and hold the
e
off /
j
button (12)
for at least three seconds. The menu
opens�
4� Press the
e
off /
j
button (12)
repeatedly until the display shows
No / Old filter
�
5� Select
Activate filter
with the upper
rotary knob (14)�
6� Press the
start button (10).
7� Place a receptacle with a capacity of
0.5 litres under the outlet.
8� Press the
start button (10).
9� Pull the milk frother (6) to open it.
10� Water will now flow through the filter to
rinse it�
11� Push the milk frother (6) in to close it.
12� Empty the container.
The appliance is ready to use once more.
Note: Rinsing the filter simultaneously
activates the setting for the
Change filter!
display�
The filter is no longer effective when the
Change filter!
display appears, or at
the latest after 2 months� It needs to be
replaced for reasons of hygiene and so that
there is no build-up of limescale (this could
damage the appliance)�
Replacement filters can be obtained from
retailers (TZ70003) or from customer
service (467873). If no new filter is used,
turn the
filter
setting to
No / Old
�
Note: You can use the filter indicator to
mark the month in which you inserted the
filter. You can also mark the month in which
you will need to replace the filter next (at
the latest after two months)�
Note: If the appliance has not been used
for a prolonged period (e�g� vacation) the
filter should be rinsed before the appliance
is used again. To do so, dispense a cup of
hot water and pour it away.