Zone control, P.147), Tion – Kenwood DNN770HD User Manual
Page 74: P.146)
146
147
Zone Control
You can select different sources for both
front and rear positions in the vehicle.
1
Touch [Zone Control].
Zone Control screen appears.
2
Touch [Dual Zone].
3
Set each source as follows.
[
D] (Front Source, Rear Source)
Select the audio source for each.
[
S], [R] (Rear VOL.)
Adjust the rear channel volume.
[Single Zone]
Touch to turn off the dual zone function.
NOTE
• When the rear speaker sound is switched, the
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
• When the dual zone function is set to on, the
following functions are not available.
–Output from the subwoofer
–Subwoofer Level/Bass Boost
–Equalizer Control/Sound Effect/Listening
Position
–DSP Bypass Control/Speaker Setup/Car Type
Setup
Ñ
Highway sound setting
You can boost a certain range of sound that
becomes hard to hear due to road noise.
1
Touch [Highway Sound] in the Sound
Effect screen.
Highway Sound screen appears.
2
Select the boost level from among
[High], [Low], and [OFF].
Ñ
Elevation
You can raise the sound position heard from
the speakers virtually.
1
Touch [Elevation] in the Sound Effect
screen.
Elevation screen appears.
2
Select Elevation level from [High],
[Low], and [OFF].
Ñ
Realizer and Supreme
You can restore the sound lost due to audio
compression to a realistic sound.
1
Touch the screen in the Sound Effect
screen.
Realizer
Realizer is sound enhancement and boosting
low frequencies (bass boost).
Select the level from “OFF”/ “Level1”/ “Level2”/
“Level3”.
Supreme
Turns ON/OFF the Supreme function.
Technology to extrapolate and supplement
with proprietary algorithm, the high-frequency
range that is cut off when encoding.
This function works on DVD MEDIA, USB, SD
and iPod sources.