Siriusxm™ satellite radio operation, Siriusxm™ basic operation, Siriusxm™ satellite radio – Kenwood DNN770HD User Manual
Page 50: Operation 98, Iriusxm™ satellite radio operation
98
99
4 Preset key/Multi function menu
Recalls the memorized channel. When touched for 2 seconds, the current channel being received is
stored to the memory.
When switched, various functions can be performed by using keys in this area.
For details on the menu, see
5 Sub function key
Touch to display “Sub function menu” (7 in this table).
6 Information list
Displays information about the current music being played: Channel Name, Artist Name, Song Title,
Content Info, Category Name, Channel Description, Similar Channels
7 Sub function menu
The following functions can be performed by using keys in this area.
• Tunes in a station: Touch [CH
S] [CHR].
• Searches the previous/next track: Touch [
4] [¢]. Fast forward/fast backward when keep on
touching.
[
4] change the Replay. See
.
• Tunes in by entering direct number: Touch [
] and enter the desired number. For details, see
.
8 Sub function/ List switching key
Touch to display “Sub function menu” (7 in this table).
Touch and hold to switch between the preset list and the information list.
SiriusXM™ Basic Operation
Most functions can be controlled from the source control screen.
Before use
• SiriusXM Satellite Radio operation requires the connection of the optional SiriusXM Connect Vehicle Tuner. To
activate the SiriusXM Vehicle Connect tuner, you will need the Radio ID.
• Make a note of your Radio ID: To confirm your Radio ID, tune to channel 0. The letters I, O, S and F are not used in
any Radio ID. The Radio ID is also located on the label of the SiriusXM Connect Vehicle Tuner.
• How to activate your SiriusXM Service: Go to www.siriusxm.com/activatenow or call 1-866-635-2349 to activate
your SiriusXM Vehicle Connect Tuner.
To activate SiriusXM Canada service go to www.xmradio.ca and click on “ACTIVATE RADIO” in the top right corner,
or call 1-877-438-9677
• SiriusXM service is only available in North America.
NOTE
• Set the remote controller mode switch to AUD mode before starting operation, see
Simple Control screen
List Control screen
2
6
2
7
1
7
3
3
4
4
5
8
1 Signal Strength indication
Displays the received signal strength of the SiriusXM tuner.
2 Information display/Control switching area
Displays the following information.
• [SXM1], etc.: Band display
• Preset #: Preset number
• #CH: Channel display
• Logo: Channel logo display
Touch to switch between the Simple Control and List Control screen.
3 Multi function key
Touch to switch the multi function menu. For details on the menu, see
ñ
S
iriusXM™ Satellite Radio Operation