Dake Dura Press Force - 10/20 - Manual (Page 9)

Force 10M /Force 20M9
9 06/10
1.6 GENERAL SAFETY INSTRUCTIONS
Use of the press is allowed exclusively for trained and authorized
personnel.
When you leave the machine, even if only for a moment, make sure it is not
in the pressing phase, dangerous for you and for others.
In the event of confusion or uncertainty in the manner of operation to be
made, refer to the user’s manual or call qualified personnel to resolve your
doubts.
Operate the manual pump only from the working position that is in front of
the hydraulic power unit.
It is forbidden to use equipment or carry out operations that may have even
the slightest chance of projecting splinters or parts of equipment.
Section 2.0
2.0 TECHNICAL DATA SHEET
Below we give a table summarizing the technical-dimensional particulars of the
DURA series Presses.
Model
Dura
Press
Ton
Max.
Width
between
Uprights
Width
between
Table
Channels
Max.
Ram
Travel
Max.
Ram to
Table
Base
(w x d)
Height Weight
lbs
Force 10 10 20” 4” 6” 36” 31 x 19” 71” 350
Force 20 20 20” 4” 6” 36” 31 x 19” 71” 485
MAXIMUM OPERATING PRESSURE FOR ALL MODELS 350 bars.
Model
Dura
Press
Bore Thread Hole
size
Force 10 60 mm 12 mm
Force 20 80 mm 12 mm