Dake Dura Press Force - 10/20 - Manual (Page 3)

Force 10M /Force 20M3
3 06/10
Section II
LIST OF SAFETY CHECKS
ALWAYS ACT WITH
CAUTION
ATTENTION
PRECAUTION
Read the rest of this section very carefully before proceeding to read the
following sections.
CAUTION general
When working always pay attention and be alert. Be careful. Be aware of possible
hazards.
CAUTION regulations
Observe the law and regulations of the premises regarding you and your machine.
CAUTION clothing
Injury may occur if you do not wear suitable clothing. Loose clothing may get caught up
in the machinery. Wear protective clothing suitable for the work. Examples: rigid
helmet, safety shoes, safety earmuffs, close-fitting overalls, industrial gloves, etc. Keep
cuffs buttoned. Do not wear a tie or scarf, or long hair.
ATTENTION tools
Always check that your tools are in good condition and that the tools are suitable for the
work to make (ex. don’t use the pliers as hammers etc.)
ATTENTION repairs
Don’t make repairs or any other service that you are not familiar with.
ATTENTION tampering
It is severely forbidden to modify or to tamper with press parts that can alter the
standard working.
CAUTION hydraulic hoses
Hydraulic hoses may be the cause of accidents. Regularly check such hoses looking
for:
Damaged fittings
Outer coverings worn by rubber
Swollen outer coverings
Bent or crushed hoses
And anything else that may be a hazard.