Dake Dura Press Force - 10/20 - Manual (Page 17)

Force 10M /Force 20M17
17 06/10
Section 6.0
6.0 SAFETY INSTRUCTIONS
THE MANUFACTURER DECLINES ALL LIABILITY FOR
DAMAGE TO THINGS OR PERSONS CAUSED BY NON-
OBSERVANCE OF THE SAFETY INSTRUCTIONS GIVEN IN
THIS MANUAL WHICH SUPPLEMENT THE CURRENT LEGAL
REGULATIONS IN WORKPLACES.
IT IS EXTREMELY IMPORTANT FOR THE OPERATOR TO UNDERSTAND ALL
THE SAFETY INSTRUCTIONS LISTED BELOW IN ORDER TO PREVENT
DAMAGE TO THEMSELVES, TO THINGS OR TO OTHERS.
A machine not subject to regular maintenance is a danger for the operator
and for the persons working nearby. To ensure safe and efficient operation of
the machine, check that the maintenance schedule is regularly observed.
It is strictly forbidden to tamper with, modify, or elaborate parts of the
machine that alter its regular operation.
The press is designed exclusively for use by a single operator.
Use of the press is reserved exclusively for authorized and qualified
personnel informed about the risks deriving from its use.
Before operating the machine, the operator will check that there is no
equipment or persons in the immediate vicinity of the machine whose
presence may be dangerous for themselves and for others.
All work requiring the piece to be pressed to be supported by the operator
is forbidden.
It is necessary to arrange suitable supporting and positioning equipment
for the pieces to be pressed.
It is strictly forbidden to press, cut, draw, and do anything else with pieces
whose dimensions or physical nature may explode or product splinters.
In the event of there being the slightest possibility of the pressed piece
exploding the user is obliged to arrange a protective barrier of adequate
dimensions and substance (e.g. polycarbonate) all around the press to protect
the personnel present, and to position an additional partition between the
control area and the work area to protect the operator.